Core Moto, Apex 6 Forged Wheel Set




Please allow 6-8 weeks for delivery



Size: 3.50/6.00×17

Bare Wheel weights.
FW35LM1 Front: 5.78 Lbs
RW6LM1 Rear: 7.938 Lbs

Anodized Gloss Black
Anodized Gloss Gold
Anodized Gloss Red
Anodized Gloss Blue
Anodized Light Gloss Gold

The Apex-6 design is an ultralight modern Superbike wheel designed for the race track, Yet is also street legal. Every design element is intended to decrease weight while retaining strength and style. The Apex-6 is the first ever fully monolithic, hollow hub Superbike wheel made 100% in the USA. Design, Forging, heat treating, turning, machining, anodizing and final assembly all happen in the USA. Core Moto spent 16 months developing the Apex-6 with 1 goal in mind. To produce the very best forged aluminum wheel the world has to offer.

Standard Available Anodized wheel Colors: Typically 4-5 weeks to ship.
Gloss Gold
Gloss Black
Gloss Blue
Gloss Red
Light Gloss Gold

Note: Anodized colors can vary from batch to batch. Wheel sets are paired as front and rear sets in the anodize process… Very slight shade differences from front to rear may be present, but will remain under a 5% range. In most cases this is undetectable when the wheels are mounted on the vehicle.

Performance Difference:
Decreasing unsprung weight (weight below the suspension) and rotational mass greatly improves several responsive aspects of usable performance you can actually feel. The Apex-6 Wheel was designed to reduce overall weight, while also centralizing mass to decrease rotational forces. These weight reductions result in improved suspension response, lighter handling, faster acceleration and shorter braking distances. More info about unsprung weight and rotational mass at the bottom of the page.

About the wheel:
CAD Designed one piece proprietary Forged monolithic hub design. Core Moto makes true forged wheels, purpose built for performance. Rather than using market available generic forged blanks, Core Moto wheel forgings are made specific to each model we offer. Our forgings are produced in the USA by the same forging plant that makes wheels for Pagani, Ferrari, Aston Martin, Koenigsegg, Lamborghini and Mercedes AMG to name a few . Although a custom forging limits the amount of spoke designs and sizes we can offer, it nets a better quality product overall. Each wheel starts out as an aluminum billet that does not resemble a wheel. This Billet is then heated and placed into a 6000 ton controlled Hydraulic constant pressure forge and roll machine, This creates the basic shape of the wheel profile. This process is highly controlled to distribute the grain of the metal in a way that optimizes the strength of the wheel requiring less material (weight) needed in the final product. Constant pressure forging creates a more controlled and repeatable product than traditional drop forging. After forging, the near net forged blanks are turned and milled by 3 and 5 Axis CNC machines and carbide cutting tools to remove material and give the wheel its final shape.

About our bearings:
Always factory equipped with high quality, smooth rolling bearings from genuine top tier bearing manufacturers….. Currently the availability of counterfeit bearings is a worldwide epidemic. Core Moto only sources genuine brand name bearings from top tier bearing distributors or factory direct to ensure tolerances and material compositions meet specifications. Our bearings are in most cases larger and wider than stock for more stability. We also choose a bearing seal type that is suited for long service life when maintained properly. Ceramic hybrid bearings are available upon request as an upgrade. We only suggest using ceramic bearings on regularly maintained race specific bikes.

Cush drive bushings:
New wheels made by Core Moto come with serviceable 5 or 6 pot cylindrical Cush Drive System for High HP Applications. In 2016 Core Moto developed a new Cush drive bushing that has proven durability. Our new bushing is now a single bonded hardened steel and firmer compound rubber unit. If your wheels were made before Core Moto started producing Carrozzeria wheels in 2016, improved bushings can be ordered in our genuine replacement parts section or from your favorite Core Moto dealer. As of 2019 we have 3 bushing sizes, depending on wheel model.

Sprocket Carrier:
New 5 bolt anodized CNC aluminum sprocket carrier for Apex-6 models are .25lbs lighter than V-Track 6 bolt Carriers. Each comes with metal locking sprocket nuts and an installed steel bearing retaining ring and bearing for all models. Our sprocket studs are fully re designed, now made from 2205 Duplex stainless steel (when available), yielding more strength and superior corrosion resistance. The drive stud head profile has been optimized to offer more engagement of the bushing system for even load distribution per unit. The Bolt pattern for the Apex-6 is NOT A KAWASAKI PATTERN like former Carrozzeria wheels. The Apex-6 uses a common custom 5 bolt sprocket made by most major manufacturers. More information on sprockets below. or Sprockets can be purchased at this link

Spacers and distance tubes:
Anodized CNC aluminum Spacers, Carriers and Distance Tubes are pre installed in the wheel. Some spacers will be shipped uninstalled for wheel packing reasons, but will come with a diagram for easy placement. Each part is either laser or mechanically engraved with unique part numbers to identify the placement location. Most front wheel spacers are now fully captive using oil seals. Outer spacers are captive by bearing ID sleeves on the rear.

Rotor Carriers:
Rotor carriers will be pre mounted (except S1000RR for packing reasons) with stainless steel hardware as to not interfere with modern wheel speed sensor pickups. All rotor carriers are designed to accept OEM or aftermarket equivalent brake rotor discs and rotor bolts. New carriers are designed to optimize weight savings while offering a very rigid mount.

Speed sensor rings for ABS and TC:
Core Moto is now starting to incorporate our own speed sensor rings into the final product, allowing the customer to keep their sensor rings on their OEM wheels. Core Moto was the first aftermarket wheel manufacturer in the industry to do this. This has not been fully implemented for all applications as we are adding them as we make new changes to the hardware. Some application will require reuse of both OEM rings while some applications may come with only one Core Moto Ring front or rear. Each application is different.

Valve stems:
Each wheel will come with 90 degree aluminum valve stems installed.

Sprocket requirement:
Due to the bolt circle diameter of the cush drive system, All Apex-6 Wheels require the use of a custom 5 bolt pattern sprocket.
This is a common sprocket bolt pattern used by other aftermarket forged wheel companies in our industry.

You will need a sprocket to fit your current pitch 520-530. Then the proper tooth count. We can help
Bolt hole count: 5
Sprocket stud size: M10x1.25
Bolt Hole Circle diameter: 100mm
Hub Diameter: 76mm
Sprockets can be purchased at this link.

Approved DOT (USA) & JWL (Japan)
One year limited warranty

Parts diagram: Exploded view parts diagrams are included with most wheels orders. These are to be used to ensure you received the correct parts and put them in the right place when installing your wheel kit. This is to be kept for future use in case you need a new part due to loss or damage.

About Unsprung weight:
Properly set up suspension allows the lower portions (swingarm, wheels and forks) to move rapidly with the bumps and dips in the road or track surface while keeping the main structure of the vehicle on a stable un interrupted path. In short reducing unsprung weight allows the suspension to work better by reducing the mass that needs to be controlled on compression and rebound, keeping the tire traction on the ground and the chassis stable.

About Rotational mass:
Reducing rotational mass increases acceleration, decreases braking distances and improves handling. Lighter wheels decrease the amount of power needed to get the tires spinning. This also reduces the amount of braking power needed to slow down the spinning wheel down. Rapid transitions from acceleration to deceleration benefit greatly from lighter wheels. Gyroscopic force is also reduced with lighter wheels, improving handling by reducing the amount of force needed to tilt the spinning wheel axis side to side. The reduction of gyroscopic and rotational inertial forces are compounded by higher speeds.


Q:What do I get with my wheel order?
A: Most wheel sets will arrive with all components installed, except the rear sprocket carrier and left rear spacer, these can be installed by hand without tools. All you need to do is mount tires, sprocket and OEM Rotors. These are complete kits. Some select models will require you to reuse front spacers and speed sensor rings. An exploded view diagram is provided with most wheel kits, for part location and replacement part ordering in the future.

Q: Do I need special brake rotors for Apex-6 Wheels?
A: No, most Apex-6 Wheels will accept any rotor that fit your original wheels?
If your model requires a special rotor, it will be clearly noted in the top of the listing. This is for only 1 model as of today.

Q: What sprocket will I need?
A: Apex-6 wheels require a custom pattern sprocket: see detailed answer in product description above.

Q: Are Valve stems installed?
A: All Core Moto wheels come with 90 degree aluminum valve stems in black color.

Q: How do I clean my wheels?
A: We recommend using Lemon Pledge and a microfiber cloth to clean all anodized surfaces. If heavy cleaning is required we recommend a mild car wash soap that is acid free. Do not use de greasers or acidic washes.

Q: Will my Apex-6 wheel set fit on other bike brands and models with new components?
A: In most cases yes with replacment component sets, However each model is limited and a few can not be converted to anything else. If converting to another bike model is possible, it will likely require new spacers, rotor carriers and distance tubes at minimum. In some cases it will require a whole new component set. An entire new Component set will cost at least 30% of a full wheel set.

Q: Are the wheels painted or powdercoated?
A: Core Moto wheel standard colors Gold-Red-Blue-Black are color anodized. This is not a coating, in very simple terms it is a hardened surface treatment that is dyed. Custom Colors are offered in Anodized and Powdercoated finishes.

Q: Can I order wheels to match the paint on my bike or a specific shade?
A: Core Moto wheels standard colors are anodized and shades vary from batch to batch..we can not tailor a custom anodized shade. Custom colors offered are sometimes powdercoated or anodized, but are done so to our Core Moto specific shades. If you want Core Moto to Custom Powdercoat your wheels to a specific shade, you will need to contact us for a quote. We only use powder from a few select brands and the power will need to come from one of these brands (this offering may change).

Q: What bearings do I need to replace my worn or damaged bearings?
A: For wheels produced after January 2017 we can tell you what is needed based on your wheel P/N or application.
Each Part will also be listed on your exploded view diagram received when you purchased your wheels. Most Apex-6 wheels will use 3xB6006 in the rear and 2xB6205 in the front.

Q: What is the weight difference between Core Moto and OEM wheels?
A: Generally we do not record OEM wheel weights, however we are working to get accurate numbers. Each model we list on our home site will include front and rear fully assembled Core Moto wheel weights by the end of January 2019.

Q: How do I repair a bent or cracked wheel?
A: We can not recommend repairing a damaged wheel.

Q: What size wheels do you offer?
A: Currently (1-7-19) we offer Rear wheels in 5.5″x17″ and 6″x17″ while all our front wheels are 3.5”X17″

Q: Can you put a 6″x17″ inch rear wheel on a bike that came from the factory with 5.5″ rear wheels?
A: in some cases yes, but not all. For example 6″ conversions is a popular option we offer for the R6, CBR600RR and GSX-R 600/750, while we only offer a 6″ conversion for the Panigale 899-959. Please check with customer service.

Q: Are Core Moto wheels DOT approved?
A: In short this answer is yes. DOT does not test wheels, only lays out guidelines and strict perimeters for testing. Core Moto wheels have been tested by an accredited laboratory to meet JASO / DOT / JWL standards.

Q: What tires do I need to use with Core Moto Wheels?
A: You will use the same tire equivalent to what you would choose for your stock wheels. (except for 5.5 to 6″ conversion kits)

Additional information

Bearing Type

Standard Steel, Ceramic +$400

Bike Make,Model & Year

BMW S1000RR/R 15-19 Non HP, BMW S1000RR 10-14 NON HP, Kawasaki Z1000/Ninja 1000 2010-current, ZX10R 04-05, ZX10R 06-10, ZX10R 11-15 ABS/Non ABS, ZX10R ABS/Non ABS/All 16-21, ZX14R ALL Years, GSXR 1000 /R/ABS 17-21, GSXR 1000 01-04, GSXR 1000 05-08, GSXR 1000 09-16, HAYABUSA 99-07, Hayabusa 08-12, Hayabusa /ABS 13-21, Hayabusa 2022, TL 1000 All, GSXR600/750 06-07 6" REAR, GSXR 600/750 08-2010 6" REAR, GSXR600/750 2011-Current 6" rear, R6 03-2016 6' Rear, R6 ABS 2017-current 6" rear, R1 04-2014, R1/R1M/ABS/R1S 2015-current, FZ10/MT10 ABS 2015 current, FZ09 non ABS 2013-, Aprilia RSV4/RSV4 Factory/APRC/Tuono 09-2012, Aprilia RSV4/RSV4 Factory/APRC/Tuono 2013-Current, CBR 600 2003-2006 6" Rear only, CBR 600 2007-Current 6" rear Only, CBR 1000RR ABS/NON ABS/SP 2017-2019, CBR non abs 2008-2016, CBR 1000RR 2004-2007, RC51 200-2006, Ducati 899 Panigale 6" Rear All Years, Ducati 959 Panigale 6" Rear All

Wheel Color

Gloss Bright Gold, Gloss Red, Gloss Blue, Gloss Black, Gloss Clear +$140, Gloss Light Gold +$140


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Pin It on Pinterest

Share This